2026 FAAC PRICE LIST

Controllers

Radio Control Systems RF wireless signal transmission system category 2. Dual channel device transmits the status of the pressure sensitive edges on the mobile part of the gate, secure and wire free. The transmitter is battery operated. The addition of an extra transmitter can allow both the mobile and static edges to be connected to a single receiver. Radio receiver unit Additional transmitter Description Part Number Net Price (£) Dual channel radio edge system Cat 2, including Tx & Rx N-WLESS KIT 164.43 Replacement batteries (2 per transmitter) N-14342 9.12 Additional transmitter for dual channel radio edge N-WLESS TRANS 86.31

Radio Control System with BUS connection The radio system simplifies the installation with no need to wire cabling between safety edges and the control board. The system is made of a XRS 868 radio receiver able to connect with XTS 868 transmitters, one or two resistive safety edges 8.2 K0hm can be connected to the transmitters or auxiliary devices. Each radio receiver XRS 868 is able to manage up to 6 tranmitters XTS868 ie up to 12 safety edges. The XRS receiver allows cabling to the standard control boards equipped with safety inputs N.C. or 8.2K0hm through independant relay outputs, or to FAAC control boards equipped with BUS2easy through just 2 non polarized wires. The transmitter is operated by AA 1.5V batteries. Cat 2 and 3.

Radio receiver unit

Additional transmitter

Description

Part Number N-787012 N-787013

Net Price (£)

XTS 868 transmitter XRS 868 receiver

71.30 85.50

Description

Part Number N-785200

Net Price (£)

CN60 single channel, Cat 2 controller for fixed edges

61.90

UP to 2 series made by 4 resistive 8K2 safety edges in parallel

169