Product catalogue

Controllers

RADIO CONTROL SYSTEMS

Radio Control Systems RF wireless signal transmission system category 2. Dual channel device transmits the status of the pressure sensitive edges on the mobile part of the gate, secure and wire free. The transmitter is battery operated. The addition of an extra transmitter can allow both the mobile and static edges to be connected to a single receiver.

Dual channel radio edge system Cat 2, incl Tx & RX N-WLESS KIT

Additional transmitter for dual channel radio edge N-WLESS TRANS

Replacement batteries (2 per transmitter) N-14342

Radio Control System with BUS connection

The radio system simplifies the installation with no need to wire cabling between safety edges and the control board. The system is made of a XRS 868 radio receiver able to connect with XTS 868 transmitters, one or two resistive safety edges 8.2 K0hm can be connected to the transmitters or auxiliary devices. Each radio receiver XRS 868 is able to manage up to 6 transmitters XTS868 ie up to 12 safety edges. The XRS receiver allows cabling to the standard control boards equipped with safety inputs N.C. or 8.2K0hm through independant relay outputs, or to FAAC control boards equipped with BUS 2 Easy through just 2 non polarized wires. The transmitter is operated by AA 1.5V batteries.

XTS 868 transmitter N-787012

XRS 868 receiver N-787013

Inductive transmission system for mobile edges Signals from mobile edges are transmitted via converters and a steel cable. The Cat 2 or Cat 3 control units can also be used to monitor fixed edges with no additional equipment.

DIMENSIONI E CARATTERISTICHE TECNICHE S 700 H

Intra 6 Dual channel, Cat 2 controller only N-240578

Intra 6 Dual channel, Cat 3 controller only N-263915

Intra 6 dual channel CAT 2 con troller and transmission kit N-256433

Intra 6 Dual channel, Cat 3 controller and transmission kit N-264750

CN60 single channel, Cat 2 controller for fixed edges N-785200

M60 ELECTRO-MECHANICAL EDGE

Specifications

Model

Part Number

M60 electro-mechanical device (length 1.5m) M60 electro-mechanical device (length 1.7m) M60 electro-mechanical device (length 2.0m) M60 electro-mechanical device (length 2.5m) M60 electro-mechanical device (length 3.0m)

736425

Rubber profile, height 60 mm Microswitch for controlling voltage of small cable Microswitch for detecting obstacles Sensitivity adjustment Connection terminal board Protection class: IP 55 Operating ambient temperature: -20 °C to +55 °C

736426

736427

736428

736429

144

Please note the M60 is not CAT2/3 compliant