Product catalogue

PRODUCT CATALOGUE

GATE AUTOMATION AND BARRIERS ACCESS CONTROL SYSTEMS GATE AUTOMATION AND BARRIERS ENTRANCES & AUTOMATIC D ORS ACCESS CONTROL SYSTEMS

ENTRANCES & AUTOMATIC DOORS

A100 Compact

The FAAC catalogue is presented in an easy to use format enabling speedy selection and specification of FAAC products to suit your automation needs. Colour coded All the products in the FAAC catalogue belong to “families.” To make identification easier they are grouped into colour coded sections. Introduction

AUTOMATED SYSTEMS FOR SWING LEAF GATES AUTOMATED SYSTEMS FOR SLIDING GATES AUTOMATED SYSTEMS FOR SECTIONAL DOORS AUTOMATED SYSTEMS FOR DOORS AUTOMATED SYSTEMS FOR FOLDING DOORS AUTOMATIC BARRIERS ELECTRONIC CONTROL UNITS ACCESSORIES ACCESS CONTROL AND TRAFFIC BOLLARDS

The advantages The FAAC catalogue contains short explanations of characteristics and advantages offered by the FAAC products with dimensional data and information on the available packages which enable you to keep all applications under control. Product selection made easy With the explanatory tables you can help your customers make the best choice and give them all the information they need. Part Numbers Part numbers are presented to enable an automation system to be simply compiled. If, however, assistance is required, our sales office will be happy to help with verbal or written quotations.

Description of symbols

Electronic control board with integrated radio control decoding

Electronic control board for accessories with two-wire cabling (BUS), FAAC proprietary protocol

Hydraulic operators with electric motor 24 Vdc

Smart solution that allows remote management of automation systems

1

SAFE & GREEN. Innovation has symbols.

• SAFE &GREEN is the FAAC answer for amodern approach to theworld of automatic systems FAAC, a pioneer in the world of automatic systems, launched systems and solutions able to effectively respond to the topics it is very passionate about: • The safety of automated installations is fully compliant to EU norms and current standards • Reduction of energy consumption enables a lower environmental impact and, as a consequence, a quantifiable cost saving for the end user.

The symbols describe the product use application field.

Loading/ unloading sales areas

Hospitals/Care facilities

Residential

Car parks

Pharmacies

Condominium/ Offices

Pedestrian gateways

Airports

Hotel/Residence

Restaurants

Vehicular gateways

Industrial

Banks

Shopping malls

2

SAFEzone. everything is simpler, everything is safer.

With SafeZone, FAAC identifies systems that can assist the functions of automation in accordance with the requirements of the European Directive currently in force (MD 2006/42/EC) safety.

SafeZone are FAAC systems, that can be either hydraulic or electromechanical with supply voltage at 230VAC or 24VDC. Through the use of new electronic control boards and devices, such as the new absolute encoder SAFEcoder (Patent FAAC) they allow, a higher degree of safety and reliability to be achieved not only with new installations but also the retrofit of FAAC systems already installed, without the need to replace the operators.

• SAFEcoder: the heart of safety • The new absolute encoder SAFEcoder, ensures complete control of the movement and the reversal on obstacle detection, and presents the following advantages: • Can be installed on all the FAAC automation for swing gates, hydraulic and electromechanical, 230VAC and 24 VDC; • Is easy to apply on automation already installed, without having to modify the attachments and installation dimensions; • Automatically finds with extreme precision the deceleration points and stop without the need of electrical limit switches; • Allows you to prevent the automated push against the stop, thereby increasing the frequency of use and the life, and avoiding the waste of energy; • Gives the possibility of eliminating the mechanical stops, manually setting stop points, even for partial openings; • After a power failure, the absolute encoder remembers the position of where the gate has stopped, preventing malfunctions.

GREENTECH: the most natural choice for energy saving.

With GREENTECH, FAAC identifies systems for the automation of gates with a combination of the latest generation control boards, and mechanical devices or patented technological innovations that allow the reduction of the energy consumption of automation systems such as: • Switching power supply with low energy consumption instead of traditional laminated or toroidal transformers. • Efficient mechanical reduction systems (CYCLO - Patent FAAC ) for automatic sliding gates (mechanical efficiency of 80% = more than twice the conventional reductions); • System optimization of opening and closing (Energy Saving) in walkways (automatic doors); • Control cards with the possibility of enabling states of stand-by mode to reduce power consumption when the automation is not in operation; • SAFEcoder absolute encoder (FAAC patented) to reduce the time of actual work. The goal is a better environment and a tangible benefit for the end user, due to the reduction in the estimated energy costs required by the automation system. All this is achieved without sacrificing the high performance levels of FAAC automation.

All systems and equipment SafeZone and GREENTECH are immediately identifiable by a dedicated logo.

EXAMPLE DATA SHEET. LIST PRODUCTS OR

COMBINATION OF PRODUCTS THAT ALLOW AUTOMATION TO BE IDENTIFIED AS SAFEZONE AND / OR AS GREENTECH.

4

Timeline of the evolution of FAAC.

FAAC is Founded Fabbrica Automatismi Apertura Cancelli (manufacturer of automatic gates)

1965

FAAC creates the automation market for residential use

1970

FAAC France opens

1981

FAAC GmbH (Germany and Austria) open

1984

FAAC UK opens

1985

FAAC International (USA) is created

1988

Acquisition of FAAC Electronics (Ireland) for all electronic component production

1989

FAAC SA (Spain) is born

1990

, Acquisition of Genius electro-mechanical automation specialist

1994

Acquisition of Spazio Italia - Important player in access control market

1999

FAAC branches in Poland, Scandinavia, Benelux and Shanghai open

2002

Acquisition of Voltec, shutter blind automation (France)

2002

FAAC India opens

2005

Acquisition of Altron - Tubular motor specialist

2006

Acquisition of DAAB (Sweden) FAAC Australia opens

2007

FAAC Middle East opens in Dubai

2008

2010

Acquisition of Clemsa (Spain)

Acquisition of Kemko (Holland)

2011

n FAAC Turkey and Russia ope Acquisition of Magnetic Autocontrol Group (Germany) Acquisition of Rossi Industrias Electromecanica (Brazil)

2012

Both Business units move to larger premises, united under one roof

2013

Acquisition of Centurion Systems (South Africa)

2016

Growth mapped out for the whole FAAC Group

2019

5

RESEARCH AND INNOVATION

FAAC worldwide presence

Passion in research for new solutions and optimi sation of existing ones. That’s the way our whole organization works, to design products that are better every day.

QUALITY Constant control of suppliers for raw materials and of the manufacturing processes - performed completely within the Group - are the guidelines for our daily activity. RELIABILITY AND SAFETY All of our products undergo very thorough testing to check their long-term reliability. Scrupulous compliance with international safety standards ensures complete safety for people and the environment. CUSTOMER SATISFACTION We work to make our solutions a perfect fit for everyday needs. We monitor the market attentively to discover and interpret new needs in advance. That’s how we guarantee satisfaction for our customers. Present and future. Thanks to the experience and quality gained over the years, we offer not only all the residential products which have made the FAAC name famous throughout the world but also expert solutions for automation and access control systems covering the retail and commercial sector such as: automatic sliding and swing doors; parking system solutions and barriers, automation for up and-over / industrial doors and vehicular traffic bollards.

More than 2400 people employed in 5 continents, 17 production plants in 15 countries, 34 sales companies in 25 countries, a network of more than 80 countries served by official distributors: these are FAAC figures. Making FAAC a leader in gate and garage doors market, one of the most important names among the European industrial system.

FAAC Group

FAAC Simply Automatic is the business unit dedicated to the field of access automation. Representing the natural evolution of the core business with which FAAC entered the market over 50 yeras ago, this unit now incorporates four product lines. HUB Parking Technology is the business unit that develops, manufactures, installs and provides after-sales services for Parking Revenue Control Systems. Through its local subsidiaries and distributors it is represented in all 5 continents. Magnetic Autocontrol is the FAAC Group Business Unit committed, with its two product lines, to the constant search for innovative solutions for access control in every production and commercial sector.

ACCESS AUTOMATION BUSINESS UNIT

PARKING BUSINESS UNIT

ACCESS CONTROL BUSINESS UNIT

6

Index

Automated systems for swing-leaf gates

page 15

External motor 391 Electro-mechanical articulated operator for residential swing-leaf gates 24 Vdc 390 Electro-mechanical articulated operator for residential swing-leaf gates 390 Low voltage Electro-mechanical operator for residential swing-leaf gates 24 Vdc

page 16 page 18 page 20 page 22 page 24 page 26 page 28 page 30 page 32 page 34 page 36 page 42 page 44 page 46 page 48 page 50 page 56 page 58 page 60 page 62 page 64 page 66 page 68 page 70 page 54 page 74 page 72 page 76 page 52 page 71 page 84 page 85 page 86 page 87 page 88 page 90 page 92 page 95 page 99 page 102 page 38 page 40 page 77-79 page 80-81 page 82-83

412 Electro-mechanical operator for residential swing-leaf gates 413 Electro-mechanical operator for residential swing-leaf gates

413 Low voltage Electro-mechanical operator for residential swing-leaf gates 24 Vdc

415 Electro-mechanical operator for residential swing-leaf gates

415 Low voltage Electro-mechanical operator for residential swing-leaf gates 24 Vdc S418 Electro-mechanical operator for residential swing-leaf gates 24 Vdc

402 Hydraulic operator for residential swing-leaf gates

S450 H Hydraulic operator for residential and light commercial swing-leaf gates 24 Vdc 422 - 422 PED. Hydraulic operator for residential and light commercial swing-leaf gates 400 Hydraulic operator for light commercial and industrial swing-leaf gates Underground motors 770N Underground Electro-mechanical operator for residential swing-leaf gates 770N Low voltage underground Electro-mechanical operator for residential swing-leaf gates 24 Vdc 750 CP Underground Hydraulic operator for residential and light commercial swing-leaf gates S800 Underground Hydraulic operator for residential and light commercial swing-leaf gates 230 V S800 H Underground Hydraulic operator for residential and light commercial swing-leaf gates 24 V

DAAB heavy duty operators

Automated systems for sliding gates 740-741 gearmotor for residential sliding gates

C720 and C721 low-voltage gearmotor for residential sliding gates 24Vdc 746 ER Gearmotor for residential and light commercial sliding gates 844 ER Gearmotor for light commercial and industrial sliding gates

844 R 3PH Gearmotor for industrial sliding gates

844 R Reversible Gearmotor for light commercial and industrial sliding gates

884 MC 3PH Gearmotor for industrial sliding gates

Accessories Solar panel kit

NEW

Automated systems for sectional doors

D600 - D1000 On-ceiling electromechanically driven operator

Automated systems for doors Swing doors - 950N2, A951, DDA kit,

Sliding doors - A1000, A1400

Airslide and Retrofit kit

Door profiles TK20, TK35, TK50

Revolving doors Door packages

Automated systems for folding doors 560 Hydraulic operator for bi-folding doors for intensive use Automatic barriers

615 BPR for beams up to 5m

B614 24V barrier

620 Standard for beams up to 5m 620 RAPID for beams up to 4m

7

640 for beams up to 7m

page 105 page 108

B680H 24V hydraulic barrier for beams up to 8m

Magnetic - automatic access control for vehicles - beams up to 10m

page

112

Electronic control units El t onic l i Contr l boards

page 117 page 118 page 119 page 120 page 121 page 121 page 122 page 122 page 123 page 123 page 124 page 117 page 125 page 126 page 130 page 132 page 132 page 134 page 135 page 137 page 138 page 145 page 146 page 146 page 147 page 148 page 152 page 153 page 154 page 155 page 156 page 157 page 159 page 160 page 161 page 150 page 115 page 116 page 114

Simply Connect

NEW

E024S E145S 455 D E124

Safecoder 780D-578D

740D E721

E844T

615 BPR 624BLD

E614

E680 and Enclosures

Accessories Transmitters and receivers

Control systems - keyswitches and XTR B Reader

NEW

Control systems - push buttons Control systems -loop detectors

Control systems - token acceptor, power supplies

Safety devices - photocells Safety devices - XGuard Safety devices - Safety edges

Keypads

NEW

Lamps

Safety devices - M60, flashing lamps, Gate stops, Timer, Traffic lights

Additional devices - locks

Intercom systems

Access control and traffic bollards

Viper 400: control board

Accessories

RESIST SA: Autonomous reader for pedestrian and vehicle gates

RESIST: Readers for pedestrian and vehicle gates

MAG100

TAG 10 proximity reader

MINITIME

MINITIME SA

GSM Key

FAAC J200 bollard

page 164 page 166

FAAC J Series V2 traffic bollards FAAC J Series 2K traffic bollards

page

168

FAAC M30 bollard FAAC M50 bollard

page 170 page 172

8

Swing Gate Parameters

Operator

TYPE OF USE Light Comm.

Max Cycles/hr

Max Leaf Length (m)

Lock Req Fro

Res.

Ind

30

3 3

2.0 2.0 2.0 1.8 1.8 1.8 2.5 3.0 2.5 3.0 2.3

390

    

100

390 24V

80 per day

2.5 1.8 1.8 2.5 2.5

391 412

18 50 30 30 25 75 75 55 55 55 55 55 55 70 70 70 70 60 80 50 50 45 45 45 45 45 30 45 30 30

optiona

412 24V

413 (with Stops)

           

100

413 24V (with Stops)

3 4 3 4

415

415 L

415 24V

415 L 24V

80 per day

2.7 1.8

S418

  

optiona

402 CBC 402 SBS

3

0.0

1.8

optiona

422 CBCS & CBACS

           

3

0.0

422 SBS

1.8

optiona

422 CBC & CBAC

3

0.0

422 SB

1.2 1.2

optiona

422 PED CBC 422 PED SB S450 CBAC

0.0

Continuous** Continuous**

2 3

optiona

                       

0.0

S450 SB

2.2

optiona

400 CBC/CBAC

4 7

0.0 0.0

400 SB

400 SBS

2.2 2.2 2.5 2.5 2.5 1.8 1.8 2.5 2.5

optiona optiona

400 CBACR 400 CBAC LN

0.0

400 SB LN

UNDERGROUND 770

2.0 2.0

 

100

770 24V

optiona optiona

750 100deg / 750 CP CBAC 750 180deg / 750 CP CBAC 750 100deg /750 CP SB 750 180deg /750 CP SB S800 CBAC 100deg/ 230V S800 CBAC 180deg/230V S800 SBW 100deg/230V S800 SBW 180deg/230V S800 CBAC 100deg/E124 S800 CBAC 180deg/E124

                       

0.0 0.0

2 2 4 4 2 2 4 4

optiona optiona

0.0 0.0

Continuous** Continuous** Continuous** Continuous**

optiona optiona

0.0 0.0

S800 SB 100deg/E124 S800 SB 180deg/E124

9

** Operator rated for continous duty, thermal protection may limit number of cycles dependant on control panel

om (m)

Speed

Stroke (mm)

Max Trust daN Torque (Nm)

Power (W)

Current (A)

8deg/sec 8deg/sec 13deg/sec 1.6cm/sec 1.6cm/sec 1.6cm/sec 1.6cm/sec 1.6cm/sec 1.6cm/sec 1.6cm/sec 1.6cm/sec 1.8cm/sec 1.3cm/sec 1.0cm/sec 1.0cm/sec 1.0cm/sec 1.3cm/sec 1.3cm/sec 2.0cm/sec 2.0cm/sec 2.6cm/sec 2.6cm/sec 1.0cm/sec 1.0cm/sec 0.75cm/sec 1.5cm/sec 1.5cm/sec 1.5cm/sec 6deg/sec 6deg/sec 7.8deg/sec 7.8deg/sec 7.8deg/sec 7.8deg/sec 7.8 deg/sec 7.8 deg/sec 7.8 deg/sec 7.8 deg/sec

250 200 250

280

1.2

40

2 5

120 280

al

290 290 300 300 300 400 300 400 350 240 240 240 240 240 240 160 160 305 305 260 260 260 260 380 380

350 250 200 250 300 300 280 280 180 500 690 690 690 500 500 380 380 566 566 620 620 775 465 465 465

1.5

70

3

Porte automatic

250

1.1

70

3

300 300

1.3 1.3

70 70 35

3 3

1.5

al

220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 280 280 280 280 60 60 380 70

1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1

al

al

al

al

2.5 2.5

al

al al

110deg 110deg 118deg 200deg 118deg 200deg 100deg 180deg 100deg 180deg 100deg 180deg 100deg 180deg

330 300 543 543 543 543 550 550 550 550

1.7

al al

al al

10 2.5 1.5 1.5 1.5 1.5 2.5 2.5 2.5

al al

5.5 or 8.2 deg/sec 5.5 or 8.2 deg/sec 5.5 or 8.2 deg/sec 5.5 or 8.2 deg/sec

500 or 600 500 or 600 500 or 600 500 or 600

60 60 60 60

Swing Gate Geometry

B

S

E

D

A

Z

L

α

Operator Angle

A

B C(*)

D max Z min

s

E

L

a

(mm)

(mm)

(mm)

(mm)

(mm)

(mm)

(mm)

(mm)

412 90

145 125 165 175 150 175 180 160 180 170 140 120 150 135 160 145 145 120 195 170 120 100 120 100

145 125 165 175 150 165 180 160 180 170 140 135 150 135 160 145 145 135 195 170 120 100 120 100 130 120 120 160 160 170 80

290 290 330 350 340 340 360 360 360 380 280 295 300 310 320 330 290 295 390 390 240 240 240 240 160 260 260 260 380 380 380

100

45 45 75 85 70 75 80 70 70 70 60 55 60 55 60 55 60 60 70 60 50 50 50 50 50 50 50 50 50 50 50

80 80

895 895 690 690 690 708 708 708 708 708 675 675 690 690 690 690

110

80 90 90 80

S418 with Stops 90

105 105 105 105 105 105 105 105

90

110

S418 with Open Stop 90

100 100

90

110

90

S418 without Stops 90

110 100

110

413 (with Stops)

90

80 65 90 80 85 85 60 70 50 70 50 30 80 50 40

80 80 90 90 95 95 45 45 45 45 65 65 65 75 75 75

110

413 (with opening stop)

90

110

413 (without Stops)

90

100

110

415 90

1110 1110 1290 1290

110

415 L 90

125 110

110

402 90

910 910 933 933 773 960 960 960

110

422 Std 90

110

422 PED 90

80

400 90

130 100

20 20

115 125

90

0

400 LN 90

200 170 130

150 110

20 20 20

100 100 100

1200 1200 1200

115 125

80

S450 Geometry

B

B

B

D

85

D

D

85

D

Z

50

75

Z

100

1060

Z

50

75

Z

100

1060

α

B 75-84 85-94 95-104 105-114 115-124 125-134 135-144 145-154 155-164 165-175

α

20-24 25-34 35-44 45-54 55-64 65-74 75-84

110 o (3) 110 o (3) 115 o (3) 108 o (3) 100 o (3) 100 o (3)

108 o (3) 110 o (3) 110 o (3) 103 o (3) 100 o (3)

94 o (3)

100 o (3) 107 o (3) 108 o (3) 104 o (3) 111 o (2) 104 o (2) 100 o (2) 100 o (3) 105 o (3) 106 o (3) 100 o (3) 106 o (2) 110 o (3) 96 o (2)

97 o (3) 97 o (3) 95 o (3) 95 o (3) 95 o (3) 95 o (2) 95 o (2) 95 o (1) 95 o (1) 94 o (1)

100 o (3) 105 o (3)

99 o (3)

107 o (2) 100 o (2)

96 o (2) 102 o (1)

92 o (2) 98 o (1) 94 o (1) 90 o (1)

93 o (3) 90 o (3) 90 o (3) 90 o (3) 90 o (3) 90 o (2) 90 o (2) 90 o (2) 90 o (1) 90 o (1)

100 o (3) 100 o (3) 110 o (2) 101 o (2)

96 o (2)

100 o (3) 105 o (2) 102 o (2) 111 o (1) 105 o (1) 110 o (3)

D

85-94 90 o (3) 95-104 90 o (3) 105-114 90 o (3) 115-124 90 o (3) 125-134 90 o (2) 135-144 90 o (2) 145-154 90 o (1) 155-164 90 o (1) 165-170 90 o (1)

100 o (2) 104 o (2)

96 o (2) 106 o (1) 99 o (1) 94 o (1)

104 o (1) 100 o (1) 110 o (3)

100 o (2) 97 o (2) 98 o (1) 98 o (1) 94 o (1)

96 o (2) 103 o (1) 100 o (1) 94 o (1)

98 o (1) 94 o (1)

96 o (1) 92 o (1)

90 o (1)

HOLE TO BE USED ON THE REAR BRACKET

:

390 Geometry 390 Geometry

a (*)

A (mm) 60 + 110 110 + 160 160 + 210 210 + 260 260 + 310 310 +360 60 +110 110 +160 160 +210 210 +260

B (mm)

C max. (mm)

a (*)

A (mm) 60 + 110 110 + 160 160 + 210 210 + 260 260 + 310

B (mm)

C max. (mm)

730 720 710 700 690 670 650 600 540 510

430 380 330 280 240

110 +130

90

110 +130

90

190 +210 230 +250 290 +310 310 +330

120

120

391 Geometry tr

:

Automated systems for swing-leaf gates

391 External automations for swing-leaf gates

24V

Electro-mechanical operator with articulated arm for residential swing-leaf gates with single-leaf max length of 2 m (2.5 m with an electric lock)

GREENTECH System: 391 24V

Download Datasheet Datasheet available visit www.faac.co.uk

Manual available visit www.faac.co.uk

Product Features

• Compact, elegant design. Width - the crucial overall dimension - is as little as 185 mm! • Versatile, simple installation. The articulated arm allows high flexibility for the installation dimensions, enabling use also on large gate piers. • With the non-reversing gearmotor, there is no need to install electro-mechanical closing devices. In case of a power cut, the rotation of the (key protected) release device alone, makes it possible to move the gate manually. • The system has non reversing motors that hold the gates in the open and closed positions. • Built-in mechanical stops: no need to install opening and closing mechanical stops. • Electronic control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle. • Emergency battery to ensure operation in case of powercut (optional). • Option to add BUS XIB interface for applications using NON BUS devices. • IMPORTANT: to ensure correct operation, make sure that the distance between the gate hinge and any walls or lateral fencing is greater than 725 mm.

Dimensions and Example Installation

1. gate operator and control unit 2. photocells 3. safety edges/XGuard 4. keypad/intercom/controller 5. LED light 6. remote control 7. Locks 8. Signage

3

4

3 1 2

4 5 6 7 # 8 9 0 E

5

3

3

8

7

2

2

1

1

3

3

2

2

6

16

391

24V

Use

Model

Control unit

Part Number

Single-leaf max. length (m)

Use frequency (cycles/day)

Use

Model

Control unit

Part Number

Single-leaf max. length (m) 2 m (2.5 with electric lock)

Use frequency (cycles/day)

391 E

80

E024S included

104576

391

2 m (2.5 with electric lock)

80

Not included

104577

Due to 24V technology this operator will not overheat if used continuously

COMPONENTS AND SPECIFIC ACCESSORIES

Manual release key 7131005

Manual release keyring UK-Keyring

Battery Backup 390923

XIB Bus Interface 790062

End User handover booklet N-DOC1

Pair of photocells (XP20B) 785103

Two channel transmitter 787009

BUS cable 100m 6 core.5 N-Bus cable

TECHNICAL SPECIFICATIONS OF 391

391E

391

391E

391

Use frequency at 20 o C

1:25

Power supply voltage Electric motor voltage

230 Vac

/

Consecutive cycles at 20 o C Operating ambient temperature

30

24Vdc

-20 °C to +55 °C

Absorbed power

120W

110W

Protection class

IP 44

Max torque

250Nm 13 o sec

Weight

8.7kg

7.0kg

Max angular speed Max leaf length* Max leaf weight**

Dimensions (L x D x H) in mm

185 x 260 x 310

2.5m

See graph A * For leaves with a length exceeding 2 m, an electric lock must be fitted. ** The weight of the leaf depends on its length. Check graph on page 14 Notes • For a single-leaf gate, use a 391 E operator. For a two-leaf gate, use a 391E operator and a 391 operator. • IMPORTANT: Thanks to the new technologies, the E024S control board is compatible only with receiver XF 868 (facility for a connector) and with the XP20B (“bus”connection) photocells.

Useful Accessories

Keypads

Safety Edges

Photocells

Prox readers

390 External automations for swing-leaf gates

24V230

Electro-mechanical operator with articulated arm for residential swing-leaf gates with single-leaf length of 1.8 m (3 m with electric lock), for bi-folding doors with 1.5 m maximum width of single panel

230V GREENTECH System: 390 230V + E145S

Manual available visit www.faac.co.uk

Datasheet available visit www.faac.co.uk

Product Features

• The system has non reversing motors that hold the gate in the open and closed positions. • IMPORTANT: to ensure correct operation, make sure that the distance between the gate hinge and the gate pier edge is max 300 mm.

Dimensions and Example Installation

1. gate operator and control unit 2. photocells 3. safety edges/XGuard 4. keypad/intercom/controller 5. LED light 6. remote control 7. Locks 8. Signage

3

4

3 1 2

4 5 6 7 # 8 9 0 E

5

3

3

8

7

2

2

1

1

3

1

3

2

2

6

18

390

24V 30

Use

Model

Control unit

Part Number

Single-leaf max. length (m)

Use frequency (cycles/day)

1.80 (3 with electric lock)

390

18

Not included

104570

The package contains: an electro-mechanical operator, installation accessories, a thrust capacitor 8 µF 400 V. PLEASE NOTE THE ARM IS SOLD SEPARATELY

COMPONENTS AND SPECIFIC ACCESSORIES

Articulated arm (for swing gates) 738705

Telescopic arm (for bi-folding doors) 738706

Manual release key 713001

Manual release keyring UK-Keyring

End User handover booklet N-DOC1

External release cable (length 5m) 401057

Pair of photocells (XP20D) 785102

Two channel transmitter 787009

Single limit switch kit 390682

Control board 455D 790917

TECHNICAL SPECIFICATIONS OF 390

Power supply voltage

230 V ac (+6% -10%) 50 (60) Hz

Max. torque

250 Nm 140 °C

Absorbed power

280 W

Thermal protection on motor winding Operating ambient temperature

Electric motor voltage

230 Vac

-20 °C to +55 °C

Absorbed current

1.2 A

Protection class

IP 44

Motor rotation speed

960 r.p.m.

Weight

11.5 kg

Reduction ratio Angular speed

1:700

Dimensions (L x D x H) in mm

410 x 130 x 130

8°/s

Notes • The operator 390 can be equipped with a closing travel limit device and an opening travel limit device. 455D/E145 board must be used to control the travel limit device/s • For obstacle detection with E145 or 455D board use safety edges. • IMPORTANT: The operator 390 must be provided with an articulated arm (swing leaf gate) or with a telescopic arm (for folding doors).

Useful Accessories

Keypads

Safety Edges

Photocells

Prox readers

390

24V

External automation for swing-leaf gates

Electro-mechanical operator with articulated arm

for residential swing leaf gates with single-leaf max length of 1.8 m (3 m with electric lock), for bi-folding doors with 1.5 m maximum width of single panel

24V SAFEzone system: 390 24V + E024S or E124

24V GREENTECH system: 390 24V + E124

Manual available visit www.faac.co.uk

Datasheet available visit www.faac.co.uk

Product Features

• The system has non reversing motors that hold the gate in the open and closed positions. • Electronic control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle. • Emergency battery to ensure operation in case of powercut (optional). • Option to add BUS XIB interface to E024S control board for applications using NON BUS devices.

• IMPORTANT: to ensure correct operation, make sure that the distance between the gate hinge and the gate pier edge is max. 300 mm.

Dimensions and Example Installation

1. gate operator and control unit 2. photocells 3. safety edges/XGuard 4. keypad/intercom/controller 5. LED light 6. remote control 7. Locks 8. Signage

3

4

3 1 2

4 5 6 7 # 8 9 0 E

5

3

3

8

7

2

2

1

1

3

1

3

2

2

6

20

390

24V

Use

Use

Model

Model

Control unit

Control uni

Part Number

Part Number

Single-l af max. length (m)

Single-leaf max. length (m)

Use frequency (cycles/day)

Use frequency (cycles/day)

1.80 (3 with electric lock)

390

Continuous use

Not included

104573

The package contains: an electro-mechanical operator, installation accessories, a release key. PLEASE NOTE THE ARM IS SOLD SEPARATELY Due to 24V technology this operator will not overheat if used continuously

COMPONENTS AND SPECIFIC ACCESSORIES

Articulated arm (for swing gates) 738705

Telescopic arm (for bi-folding doors) 738706

Manual release key 713001

Manual release keyring UK-Keyring

End User handover booklet N-DOC1

External release cable (length 5m) 401057

Pair of photocells (XP20D) 785102

Two channel transmitter 787009

E024S Control board 790286

E124 Control board 790284

Battery Backup (E024S only) 390923

BUS cable 100m 6 core.5 N-Bus cable

XIB Bus Interface 790062

Battery Backup (E124 only) includes shelf UK-Battery

Single limit switch kit 390682 (managed only by E124)

TECHNICAL SPECIFICATIONS OF 390

Power supply voltage

230 Vac

Max. torque

200 Nm

Absorbed power

40 W

Operating ambient temperature

-20 °C to +55 °C

Electric motor voltage Absorbed current Motor rotation speed

24 Vdc

Protection class

IP 44

2 A

Weight

11.5 kg

960 r.p.m.

Reduction ratio Angular speed

1:700

Dimensions (L x D x H) in mm

410 x 130 x 130

8°/s

Notes • The following is required for a two-leaf gate: two operators, two articulated arms and an electronic control unit. • IMPORTANT: The operator 390 24 Vdc must be provided with an articulated arm (swing leaf gate) or with a telescopic arm (for folding doors).

Useful Accessories

Keypads

Safety Edges

Photocells

Prox readers

412

24V 30

External automation for swing-leaf gates

Electro-mechanical operator for residential swing-leaf gates with single-leaf length of 1.8 m

SAFEzone system: 412 + E145S+SAFEcoder

GREENTECH system: 412 + E145S

Datasheet available visit www.faac.co.uk

Manual available visit www.faac.co.uk

Product Features

• The system has non reversing motors that hold the gate in the open and closed positions. • Applications with lower intensity of use. • Simplified installation and maintenance. • Anti-crushing safety when used with optional safecoder.

Dimensions and Example Installation

1. gate operator and control unit 2. photocells 3. safety edges/XGuard 4. keypad/intercom/controller 5. LED light 6. remote control 7. Locks 8. Signage

3

4

3 1 2

4 5 6 7 # 8 9 0 E

5

3

3

8

7

1

1

1

2

2

3

3

2

2

6

22

412

230V

Use

Use

Model

Model

Control unit

Part Number

Part Number

Single-leaf max. length (m)

Singl -leaf max. length (m

Use frequency (cycles/day)

Use frequency (cycles/day)

412 DX (right hand operator) viewed from inside the gate 412 SX (left hand operator) viewed from inside the gate

1.8

18

104470

1.8

18

104471

The package contains: an electro-mechanical operator (RH or LH), installation accessories, a release key, a thrust capacitor 8 µF 400 V.

COMPONENTS AND SPECIFIC ACCESSORIES

Mounting plate 737604

Manual release key 713009

Manual Release keyring UK-Keyring

412 single fitting kit 390009

412 cover 7272795

E145S control board 790076

Pair of photocells (XP20D) 785102

Two channel transmitter 787009

Safecoder for 412 404041 *requires E145S

End User handover booklet N-DOC1

455D Control board 790917

TECHNICAL SPECIFICATIONS OF 412

Thermal protection on motor winding Operating ambient temperature

140 °C

Power supply voltage Absorbed power Electric motor Absorbed current Motor rotation speed Rod extension speed Traction and thrust force

230 V ac (+6% -10%) 50 (60) Hz

280 W

-20 °C to +55 °C

230 Vac

Protection class

IP 44 6.5 kg

1.5 A

Weight

1400 r.p.m.

1.5 cm/s

Dimensions (L x D x H) in mm

1000 x 90 x 195

0 to 320 daN

Notes • For obstacle detection with E145 board use safety edges and/or safecoder. For obstacle detection with 455D use safety edges. • The right leaf version (RH and LH) can be determined by looking from the inside of the property. • E145 control board required when using safecoder

Useful Accessories

Keypads

Safety Edges

Photocells

Prox readers

Electro-mechanical operator for residential swing-leaf gates with single-leaf max length of 1.8 m (2.5 m with electric lock) 413 24V230

External automation for swing-leaf gates

230V SAFEzone system: 413 + E145S + SAFEcoder

GREENTECH system: 413 + E145S

Datasheet available visit www.faac.co.uk

Manual available visit www.faac.co.uk

Product Features • Integrated opening and closing mechanical stops (the travel limit mechanical stops need not be installed). • Available in versions with/without limit switches • Limit switches (if present) with facility for controlling travel limit or slow-down. • Half bodies are coupled with a seal in pressure cast.

• Die-cast aluminium body, entirely double-coat painted for longer life. • Manual release device with simplified key-protected activation. • Horizontal exit for cables to allow low installation. • Reverse on contact when used with optional safecoder

Dimensions and Example Installation

1. gate operator and control unit 2. photocells 3. safety edges/XGuard 4. keypad/intercom/controller 5. LED light 6. remote control 7. Locks 8. Signage

3

4

3 1 2

4 5 6 7 # 8 9 0 E

5

3

3

8

7

1

1

1

2

2

3

3

2

2

6

24

413

230V

Use

Use

Model

Model

Control unit

Part Number

Part Number

Single-leaf max. length (m)

Single-leaf max. length (m)

Use frequency (cycles/day)

Use frequency (cycles/day)

413

1.80 (2.5 with electric lock)

30

104413

413 LS

1.80 (2.5 with electric lock)

30

104414

The package contains: an electro-mechanical operator, installation accessories, a release key, a thrust capacitor 6.3 µF 400 V.

COMPONENTS AND SPECIFIC ACCESSORIES

Manual release key 7131005

Manual release keyring UK-Keyring

455D Control board 790917

E145S control board 790076

End User handover booklet N-DOC1

Safecoder 404040 *requires E145S

Plug in receiver/decoder 787854

Pair of photocells (XP20D) 785102

Two channel transmitter 787009

TECHNICAL SPECIFICATIONS OF 413 230V

413

413 LS

413

413 LS

Power supply

230 V ac

Leaf max. length (*)

2.5m

Power Current

250 W

Type and frequency of use at 20 °C Indicativemaximum hourly cycles at 20 °C

S3 - 30%

S3 - 35%

1.1 A

~30

Thermal protection

140 °C 6.3 µf

Operating ambient temperature

-20 °C to +55 °C

Capacitor

Weight of operator

6.5 kg

Thrust

200 daN

Dimensions (L x D x H) in mm

785 x 105 x 148

Rod stroke

300mm(350mmwithoutmechanicalstops)

Protection class

IP 54

Rod extension speed

1.6 cm/sec

Travel limit microswitches

NO

YES

Opening and closing mechanical stops

YES

(*) Use of the electric lock is recommended over 1.80 m

Notes • For obstacle detection with E145 board use safety edges and/or safecoder. For obstacle detection with 455D use safety edges. • Control board 455D or E145 must be used to control operators with travel limit device/s (Mod. LS).

Useful Accessories

Keypads

Safety Edges

Photocells

Prox readers

413

24V

External automation for swing-leaf gates

Electro-mechanical operator for residential swing-leaf gates with single-leaf max length of 1.8 m (2.5 m with electric lock)

24V SAFEzone system: 413 + E024S or E124

GREENTECH system: 413 + E124

Manual available visit www.faac.co.uk

Datasheet available visit www.faac.co.uk

Product Features

• Integrated opening and closing mechanical stops (the travel limit mechanical stops need not be installed). • Available in versions with/without limit switches • Limit switches (if present) with facility for controlling travel limit or slow-down. • Electronic control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle. • Emergency battery to ensure operation in case of powercut (optional). • Manual release device with simplified key-protected activation. • Horizontal exit for cables to allow low installation. • Option to add BUS XIB interface to E024S control board for applications using NON BUS devices.

Dimensions and Example Installation

1. gate operator and control unit 2. photocells 3. safety edges/XGuard 4. keypad/intercom/controller 5. LED light 6. remote control 7. Locks 8. Signage

3

4

3 1 2

4 5 6 7 # 8 9 0 E

5

3

3

8

7

1

1

1

2

2

3

3

2

2

6

26

413

24V

Use

Use

Model

Model

Control unit

Part Number

Part Number

Single-leaf max. length (m)

Single-leaf ax. length (m)

Use frequency (cycles/day)

Use frequency (cycles/day)

413 24Vdc

1.80 (2.5 with electric lock)

Continuous use

1044131

413 LS 24Vdc

1.80 (2.5 with electric lock)

Continuous use

1044141

The package contains: an electro-mechanical operator, installation accessories and a release key Due to 24V technology this operator will not overheat if used continuously

COMPONENTS AND SPECIFIC ACCESSORIES

Manual release key 7131005

Manual release keyring UK-Keyring

E024S control board 790286

E124 control board 790284

End User handover booklet N-DOC1

Battery Backup (E124 only) includes shelf UK-Battery

Pair of photocells (XP20B) 785103

Two channel transmitter 787009

BUS cable 100m 6 core.5 N-Bus cable

Battery backup for E024S 390923

XIB Bus Interface (for E024S) 790062

TECHNICAL SPECIFICATIONS OF 413 24V

413 - 24V

413 LS - 24V

413 - 24V

413 LS - 24V

Electric motor voltage Power supply voltage

24 Vdc 230 Vac

Leaf max. length (*)

2.5m 100% ~100

Type and frequency of use at 20 °C Indicativemaximum hourly cycles at 20 °C

Power Current

70W

3A

Thermal protection

- -

Operating ambient temperature

-20 °C to +55 °C

Capacitor

Weight of operator

6.5 kg

Thrust

250 daN

Dimensions (L x D x H) in mm

785 x 105 x 148

Rod stroke

300mm(350mmwithoutmechanicalstops)

Protection class

IP 54

Rod extension speed

1.6 cm/sec

Travel limit microswitches

NO

YES

(*) Use of the electric lock is recommended over 1.80 m

Opening and closing mechanical stops

YES

Useful Accessories

Keypads

Safety Edges

Photocells

Prox readers

Electro-mechanical operator for residential swing-leaf gates with single-leaf max length of 3 m (415) and 4 m (415 L) 415 24V230

External automation for swing-leaf gates

230V SAFEzone system: 415 + E145S + SAFEcoder

GREENTECH system: 415 + E145S

Manual available visit www.faac.co.uk

Datasheet available visit www.faac.co.uk

Product Features

• Available in versions with a 300 mm (max leaf 3 m) and 400 mm (max leaf 4 m) rod stroke. • Available in versions with/without limit switches • Half bodies are coupled with a seal in pressure cast. • Die-cast aluminium body, entirely double-coat painted for longer life. • Manual release device with simplified key-protected activation. • Limit switches (if present) with facility for controlling travel limit or slow-down. • Horizontal exit for cables to allow low installation. • Reverse on contact when used with optional safecoder

Dimensions and Example Installation

1. gate operator and control unit 2. photocells 3. safety edges/XGuard 4. keypad/intercom/controller 5. LED light 6. remote control 7. Locks 8. Signage

3

4

3 1 2

4 5 6 7 # 8 9 0 E

5

3

3

8

7

1

1

1

2

2

3

3

2

2

6

28

415

230V

Use

Use

Model

Part Number

Single-leaf max. length (m)

Use frequency (cycles/day)

Model

Control unit

Part Number

Single-leaf max. length (m)

Use frequency (cycles/day)

415

3,00 3.00 4.00 4.00

30 30 25 25

104415 104416 104417 104418

415 LS

415 L

415 L LS

The package contains: an electro-mechanical operator, installation accessories, a release key, a thrust capacitor 8 µF 400 V.

COMPONENTS AND SPECIFIC ACCESSORIES

Manual release key 7131005

Manual release keyring UK-Keyring

455D control board 790917

E145S control board 790076

End User handover booklet N-DOC1

Safecoder 404040 *requires E145S

415 Shaft cover (standard version only) 727525

Plug in receiver/decoder 787854

Pair of photocells (XP20D) 785102

Two channel transmitter 787009

TECHNICAL SPECIFICATIONS OF 415 230V

415

415 LS 415 L 415 L LS

415

415 LS 415 L 415 L LS

Power supply voltage

230 V ac

Leaf max. length (*)

3 m*

4 m**

Power Current

300 W

Type and frequency of use at 20 °C Indicative maximum hourly cycles at 20 °C

S3-30% S3-35% S3-30% S3-35%

1.3 A

~30

~25

Thermal protection

140 °C

Operating ambient temperature

-20 °C to +55 °C

Capacitor

8 µF

Weight of operator

7.8 Kg

8 Kg

Thrust

300 daN

Rod stroke

300 mm

400mm

Dimensions (L x D x H) in mm

835 x 105 x 148

940 x 105 x 148

Rod extension speed

1.6 cm/sec

Protection class

IP 54

Travel limit microswitches

NO YES

NO YES

(*) Use of the electric lock is recommended over 2.50 m. (**) Use of the electric lock is recommended over 3.00 m. Notes • For obstacle detection with E145 board use safety edges and/or safecoder. For obstacle detection with 455D use safety edges. • Control board 455 D or E145 must be used to control operators with limit switches (Mod. LS).

Notes • Useful Accessories

Keypads

Safety Edges

Photocells

Prox readers

415

24V

External automation for swing-leaf gates

Electro-mechanical operator for residential swing-leaf gates with single-leaf max length of 3 m (415) and 4 m (415 L)

24V SAFEzone system: 415 + E024S or E124

GREENTECH system: 415 + E124

Datasheet available visit www.faac.co.uk

Manual available visit www.faac.co.uk

Product Features • Available in versions with a 300 mm (max leaf 3 m) and 400 mm (max leaf 4 m) rod stroke. • Available in versions with/without limit switches • Electronic control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle. • Emergency battery to ensure operation in case of powercut (optional). • Manual release device with simplified key-protected activation. • Limit switches (if present) with facility for controlling travel limit or slow-down. • Horizontal exit for cables to allow low installation. • Option to add BUS XIB interface to E024S control board for applications using NON BUS devices.

Dimensions and Example Installation

1. gate operator and control unit 2. photocells 3. safety edges/XGuard 4. keypad/intercom/controller 5. LED light 6. remote control 7. Locks 8. Signage

3

4

3 1 2

4 5 6 7 # 8 9 0 E

5

3

3

8

7

1

1

1

2

2

3

3

2

2

6

30

415

24V

Use

Use

Model

Model

Control unit

Control unit

Part Number

Part Number

Single-leaf max. length (m)

Use frequency (cycles/day)

Use fr quency (cycles/day) Continuous use Continuous use Continuous use Continuous use

415 - 24 V dc

3m 3m 4m 4m

Not included Not included Not included Not included

1044151 1044161 1044171 1044181

415 LS - 24 V dc 415 L - 24 V dc 415 L LS - 24 V dc

The package contains: a low voltage electro-mechanical operator, installation accessories, a release key. Due to 24V technology this operator will not overheat if used continuously

COMPONENTS AND SPECIFIC ACCESSORIES

Manual release key 7131005

Manual release keyring UK-Keyring

E024S control board 790286

E124 control board 790284

End User handover booklet N-DOC1

Battery Backup (E124 only) includes shelf UK-Battery

Pair of photocells (XP20B) 785103

Two channel transmitter 787009

BUS cable 100m 6 core.5 N-Bus cable

Battery backup for E024S 390923

XIB Bus Interface (for E024S) 790062

415 shaft cover (standard version only) 727525

Receiver XF 868 SLH 787832

TECHNICAL SPECIFICATIONS OF 415

415

415 LS 415 L 415 L LS

415

415 LS 415 L 415 L LS

Power supply voltage Electric motor voltage

230 V ac

Leaf max. length (*)

3 m*

4 m**

24V

Type and frequency of use at 20 °C Indicative maximum hourly cycles at 20 °C

100%

Power Current

70W

~30

~25

3A

Operating ambient temperature

-20 °C to +55 °C

Thermal protection

- -

Capacitor

Weight of operator

7.8 Kg

8 Kg

Thrust

280daN

Dimensions (L x D x H) in mm

835 x 105 x 148

940 x 105 x 148

Rod stroke

300 mm

400mm

Protection class

IP 54

Rod extension speed

1.6 cm/sec

Travel limit microswitches

NO YES

NO YES

(*) Use of the electric lock is recommended over 2.50 m. (**) Use of the electric lock is recommended over 3.00 m. Useful Accessories

Keypads

Safety Edges

Photocells

Prox readers