Product catalogue

E680

TECHNICAL SPECIFICATIONS

Power supply voltage

100/ 240V~ 50(60) Hz

Standby power Motor max power

7W

240W

Max accessories load

800mA

Accessories power supply

24V

Programming

3 keys (+, -, F) and display, 1 automatic set-up key

Automatic, Automatic 1, Semi-automatic, Parking, Parking-Automatic, Condominium, Condominium Auto matic, Manned, Remote, Custom Logic, Pause time, Opening/Closing power, Opening/closing speed, Loop 1 and 2, Pre-flashing, Work time, Obstacle detection sensitivity, Cycle counter for service, LED output, Failafe output, Status output, Service request, Beam LED lighting output

Operating logic

Programmable functions

Work time Pause time Thrust power

Programmable (0 to 4.1min) Programmable (from 0 to 4.1min)

Programmable on 50 levels programmable on 50 levels

Speed adjustment Terminal board inputs

Loop1, Loop2, Open, Close, Closing safety devices, Stop, Emergency, Power supply 36V Battery XBAT, BUS 2easy Flashing lamp 24V, Brushless motor, Accessories power supply 24V, 4 programmable outputs of which one with relay Encoder, Beam release sensor, Integrated flashing traffic light, USB (for updating firmware), 5-pin minidec, decoder, RP/RP2 receiver Real time self-calibration, Sensitivity independent of the loop geometry, Loop work frequency adjustment, Occupied loop message with LED display, Loop status can be directed on programmable outputs

Terminal board outputs

Rapid connector

Intgerated detector 2 independent channels

Protection fuses

4 self-resetting

Model

Part Number

E680

63000128

Enclosures Protection class IP 55 Wall- or flush-mounting Designed for securing to DIN guide Fuse-holder Designed for installation of door locking switch Removable hinges for right or left opening Seats for capacitor supports Lock with standard triangular key Coded-key lock (optional) Dimensions (LxDxH): 213 x 118 x 270 (mm) 3 closing plugs for Ø 29 hole 2 knockout holes Ø 19 TECHNICAL SPECIFICATIONS MOD. L

Model

Part Number

Model L Housing for control boards 720118 Lock with modified key for L -LM 712805

TECHNICAL SPECIFICATIONS MOD. LM

Dimensions (LxDxH): 246 x 142 x 353 (mm) 2 closing plugs for Ø 29 hole

Model

Part Number

Model LM housing for electronics or 750 pump

2 knockout holes Ø 29 2 knockout holes Ø 19

720309

TECHNICAL SPECIFICATIONS MOD. E

IP 55 Protection class Wall- or flush-mounting Designed for securing to DIN guide Fuse-holder screw fit lid Cover closing by 4 self-tapping screws Seats for capacitor supports Dimensions (LxDxH): 204 x 85 x 265 (mm)

Model

Part Number

Model E housing for control boards

720119

124